ST flocculant 
 Naokiyo ST flocculant is a new water-soluble polymer electrolytes. With high ion, soluble in water (PH value in the whole range of completely soluble in water, and from low-temperature effects), not a gel, hydrolysis and good stability, due to the macromolecular chain ST flocculant positive charge carried by high density, water-soluble product is good, moderate molecular weight, and therefore has the dual flocculation and disinfection performance. It not only can effectively reduce the solids content of suspended solids in water, thereby reducing the turbidity of the water; but also the virus and reduce sedimentation in water trihalomethanes precursor role, so that the total carbon content in water (TOC) reduction. ST can be used as the primary coagulant and flocculant coagulant use (the equivalent amount of 0.5-0.7PPM alum 50-60PPM), for clarification of the water had a marked effect, especially for low turbidity water treatment, but also other types of the reach of the polymer flocculant. ST flocculant and traditional inorganic coagulant (such as aluminum sulfate, aluminum chloride, etc.), compared with less sludge produced, fast-settling velocity, water quality, low cost, but also a new process of direct filtration , which is the traditional treatment is undoubtedly a major reform. Therefore, the flocculant is more and more used in reverse osmosis pre-treatment system. 
 Specifications: 
 Appearance: colorless or light yellow viscous liquid 
 Content: ≥ 30% 
 Intrinsic Viscosity: ≥ 50% 
 Ion degree: ≥ 50% 
 How to use: 
 ST flocculant may be used alone or with aluminum sulfate, aluminum chloride complex to use. Compound used to reduce the amount of added inorganic flocculants, and significantly reduce the amount of sludge. 
 ST flocculant concentration is to make the best use of zero or near zero potential Zate amount. When the amount is excessive, but from the dispersion. 
 ST flocculant used alone, the amount is generally 0.7-2.5PPM. 
 With aluminum sulfate, aluminum chloride compound used, the dosage is generally 0.5-1.5PPM. 
 ST flocculant as possible with pure water or water to dilute, generally within plus kits dubbed 1%, 0.5%, 0.1% of the dilute solution. In the dissolution, transport and flocculation process, do not use the high speed of mixer and pump, when the general dissolution and flocculation can be blown into the air or about 100 rev / min speed spiral mixer mixing appropriate. The effect of adding flocculant and ST methods have a great relationship, for the ST flocculant and suspended solids can be thoroughly mixed, and diluted many times as possible flocculant added. 
 Shelf life: 
 ST flocculant physical and chemical properties and stability, shelf life is two years. 
 Packaging and storage: 
 Net weight 25Kg blue plastic barrel, stored in a cool dry place. 
 Cold storage, frozen into ice or liquid gel will affect the flocculation activity, should be stored between 0-32 ℃ appropriate. 
 Address: Jiulongpo District Shuinian Village Hensen Chemical Market 1A-9-1A Tel: 86-023-61669621 Mr. Li 15111868811 
 Environmental Protection Technology Co., Ltd. Guangzhou Jie Quan (Head Office) Address: Tianhe District, Guangzhou, Zhongshan Road No. 38, plus Yue Building, Room 1208 Tel: 86-020-82318533 Mr. Li 13580569952